Lan Setup; Ip Settings - EnGenius ENH210 User Manual

9 LAN Setup

This section will guide you to setup the Local Area Network (LAN) settings.

9.1 IP Settings

This section is only available for Non-Router Mode. IP Settings allows you to configure the IP
settings of the ENH210.
IP Network Setting
IP Address
IP Subnet Mask
Default Gateway
Primary DNS
Secondary DNS
Accept / Cancel
Please make note of the following:
1. Obtain an IP address automatically is not a DHCP server. This setting allows the
ENH210 to automatically request an IP address when it is connected to a device which
has a DHCP server.
2. Changing LAN IP Address will change LAN Interface IP address. The webpage will
automatically redirect to the new IP address after Apply is selected.
Select Radio button for Obtain an IP address automatically or
Specify an IP address.
Specify LAN port IP address.
Specify Subnet Mask.
Specify Default Gateway.
Specify Primary DNS.
Specify Secondary DNS.
Press Accept to confirm the changes or Cancel to return
previous settings.