Routing Setup - EnGenius X-TRA ESR600H Manual

A N S
DVANCED ETWORK ETTINGS

6.7.9 Routing Setup

Typically static routing does not need to be setup because the ESR600H/ESR750H has adequate routing information after it
has been configured for Internet access. Static routing is only necessary if the router is connected to network under a different
subnets.
Note:
To enable a static routing, NAT must be disabled.
NAT Disabled
Click Enable or Disable to activate or deactivate Static
Routing.
ESR600H/ESR750H 6-86
R S
OUTING ETUP
U G
SER UIDE