Nat Enabled - EnGenius X-TRA ESR600H Manual

A N S
DVANCED ETWORK ETTINGS

NAT Enabled

If the router is connected with a network under the different
subnet, the routing setup allows the network connection
within two different subnets.
Enable Static Routing

ing to activate the feature.
Destination LAN IP

destination device.
Subnet Mask Enter the Subnet Mask of the destination

device.
Default Gateway Enter the default gateway IP address

for the destination device.
Hops Enter the maximum number of hops within the

static routing that a packet is allowed to travel.
Click Add to save the settings and list the configuration in the
Current Static Routing table or Reset the discard changes.
Click Apply to save the settings or Cancel to discard
changes.
ESR600H/ESR750H
Click Enable Static Rout-
Enter the LAN IP address of the
6-87
R S
OUTING ETUP
U G
SER UIDE