Configuring Advanced Settings - EnGenius X-TRA ESR600H Manual

B N S
ASIC ETWORK ETTINGS

6.3.2 Configuring Advanced Settings

Advanced settings parameters available on the router.
WARNING!
!
Incorrectly changing these settings may cause the device to stop functioning. Do not modify the settings in this
section without a thorough understanding of the parameters.
Fragment Threshold

packet during data transmission. A value too low could
lead to low performance.
RTS Threshold Enter the RTS threshold. If the packet

size is smaller than the RTS threshold, the ESR600H/
ESR750H does not use RTS/CTS to send the data
packet.
Beacon Interval Enter the beacon interval. This is the

amount of time that the ESR600H/ESR750H sets to syn-
chronize the network.
Delivery Traffic Indication Message (DTIM) Period

Enter the DTIM period. The DTIM is a countdown period
informing clients of the next point of broadcast and multi-
cast of messages over the network. Valid values are
between 1 and 255.
ESR600H/ESR750H
Enter the maximum size of a
6-30
C A S
ONFIGURING DVANCED ETTINGS
U G
SER UIDE