Port Mapping Setup - EnGenius X-TRA ESR600H Manual

A N S
DVANCED ETWORK ETTINGS

6.7.2 Port Mapping Setup

Port Mapping allows you to redirect a particular range of service port numbers from the WAN to a particular LAN IP address.
Enable Port Mapping

activate port mapping.
Description Enter notes or details about the mapped

port range configuration.
Local IP Enter the local IP address of the server behind

the NAT firewall.
Protocol Select the protocol to use for mapping from the

following: TCP, UDP or Both.
Port Range Enter the range of ports to be forwarded.

Click Add to append a new device to the list or Reset to dis-
card changes.
ESR600H/ESR750H
Click Enable Port Mapping to
6-73
P M S
ORT APPING ETUP
U G
SER UIDE