Port Mapping Setup - EnGenius ESR350 User Manual

Port Mapping Setup

Port Mapping allows you to redirect a particular range of service port numbers from the WAN to a particular LAN IP address.
To view the Port Mapping settings, click Advanced then select Port Mapping.
Enable Port Mapping
Click Enable Port Mapping to activate port mapping.
Description
Enter notes or details about the mapped port range
configuration.
Local IP
Enter the local IP address of the server behind the
NAT firewall.
Protocol
Select the protocol to use for mapping from the following: TCP, UDP or Both.
Port Range
Enter the range of ports to be forwarded.
Click Add to append a new device to the list or Reset to discard changes.
109