Printing Document From Stored Job Box; Deleting The Documents Stored In The Stored Job Box - Kyocera TASKalfa 307ci Operation Manual

Printing from PC > Printing Data Saved in the Printer

Printing Document from Stored Job Box

In Stored Job, the print data sent from the application is saved to the machine. You can set up an access code as
necessary. If you set up an access code, enter the access code when printing. Print data will be stored in the Stored Job
Box after printing. This will allow printing of the same print data repeatedly.
Print the documents stored in a Stored Job box. The procedure is as follows.
1
2

Deleting the Documents Stored in the Stored Job Box

You can delete the documents stored in the Stored Job Box. The procedure is as follows.
1
2
Display the screen.
1
[Home] key > [Job Box]
2
Select [Private Print/Stored Job].
3
Select the creator of the document.
Print the document.
1
Select the document to print > [Print]
2
Specify the number of copies to print as desired.
3
Select [OK].
Printing starts.
NOTE
If the document is protected by an access code, the password entry screen will be
displayed. Enter the password using the numeric keys.
Display the screen.
1
[Home] key > [Job Box]
2
Select [Private Print/Stored Job].
3
Select the creator of the document.
Delete the document.
1
Select the document to delete >
Document Box.
Job Box - Private Print/Stored Job
doc4100908135138 2014/10/10 10:10
doc0100908134821 2014/10/10 11:11
1
Menu
2
Select [Yes].
The document is deleted.
NOTE
If the document is protected by an access code, the password entry screen will be
displayed. Enter the password using the numeric keys.
[ ]
10:10
2
1/1
< Back Print
4-12