Table of Contents
Advertisement
Use the ▲ or ▼ keys to select the Output Resolution option.
6.
Previous Page
Output Resolution
Shrink Control
EDID Mode
OneClick Switching
PIP Scan Period
Load Factory Default
Main Menu
Information
Exit
F1
Full view
F2
PIP view
F3
Quad view
F4
PAP view
Important
Before changing this setting, make sure that the connected display can
support the selected output resolution. If an unsupported resolution is
selected, you will need to set the output resolution using the RS-232
command set. See the
7.
Select the desired resolution by using the ◄ or ► keys.
The following resolutions are available: 1024x768, 1280x1024, 1280x720,
1360x768, 1600x1200, 1680x1050, 1920x1080, 1920x1200, and Auto.
8.
Once the desired resolution has been selected, press the Esc key.
9.
The following message will be displayed:
Yes
Esc
Back
10. Press the Enter key to select the Yes option and save the changes.
To discard changes, press the ► key to select the No option, then press Enter.
11. To return to the previous screen, without making changes, press the Esc key.
1280x1024
Keep Ratio
External
Wheel
10
Esc
Exit
Enter
Select
Navigate
W S
Change
A D
#set_output
Save Before Exit?
page | 57
Sec
Settings
command for more information.
No
OSD Menu
Advertisement
Table of Contents
