Table of Contents
Advertisement
5.
Select the desired timeout by using the ◄ or ► keys.
The timeout can be set to one of the following values, in seconds: 0, 5, 10, 15, 20,
25, 30, 40, 50, or 60. To keep the OSD displayed at all times, set the OSD Timeout
value to 0 seconds. The default value is 10 seconds.
6.
Once the desired option has been selected, press the Esc key.
7.
The following message will be displayed:
Yes
Esc
Back
8.
Press the Enter key to select the Yes option and save the changes.
To discard changes, press the ► key to select the No option, then press Enter.
To return to the previous screen, without making changes, press the Esc key.
9.
Save Before Exit?
page | 49
No
OSD Menu
Advertisement
Table of Contents
