Table of Contents
Advertisement
Select the product from the Select your product drop-down list.
7.
If the product is not detected by Syner-G™, then the product will not be listed in bold
type, within the Select your product drop-down list. Verify the following:
►
The 4x1 DVI KVM Multiview Switcher is connected to the computer that is
running the Syner-G™ Software Suite, using a USB-to-Mini USB cable.
►
Make sure that the USB driver is installed and functioning correctly under Control
Panel. See
Verifying the USB Driver (page 117)
page | 120
Updating the Firmware
for more information.
Advertisement
Table of Contents
