Connecting To A Wall Socket - Sony Handycam DCR-TRV828E Operating Instructions Manual

Step 1 Preparing the power
supply

Connecting to a wall socket

When you use your camcorder for a long time,
we recommend that you power it from a wall
socket using the AC power adaptor.
(1) Open the DC IN jack cover, and connect the
AC power adaptor to the DC IN jack on your
camcorder with the plug's v mark facing up.
(2) Connect the mains lead to the AC power
adaptor.
(3) Connect the mains lead to a wall socket.
1
PRECAUTION
The set is not disconnected from the AC power
source (the mains) as long as it is connected to a
wall socket, even if the set itself has been turned
off.
Notes
•The AC power adaptor can supply power even
if the battery pack is attached to your
camcorder.
•The DC IN jack has "source priority". This
means that the battery pack cannot supply any
power if the mains lead is connected to the DC
IN jack, even when the mains lead is not
plugged into a wall socket.
Using a car battery
Use Sony DC Adaptor/Charger (optional).
Пункт 1 Подготовка источника
питания
Подсоединение к сетевой розетке
(1)
(2)
(3)
2, 3
ПРЕДОСТЕРЕЖЕНИЕ
Примечания
Использование автомобильного
аккумулятора
v
21