Sony Handycam DCR-TRV828E Operating Instructions Manual page 227

Identifying the parts and controls
To prepare the Remote Commander
Insert 2 R6 (size AA) batteries by matching the +
and – polarities on the batteries to
the + – marks inside the battery compartment.
Notes on the Remote Commander
•Point the remote sensor away from strong light
sources such as direct sunlight or overhead
lighting. Otherwise, the Remote Commander
may not function properly.
•Your camcorder works in the Commander
mode VTR 2. Commander modes
1, 2 and 3 are used to distinguish your
camcorder from other Sony VCRs to avoid
remote control misoperation. If you use another
Sony VCR in the Commander mode VTR 2, we
recommend changing the Commander mode or
covering the sensor of the VCR with black
paper.
Обозначение частей и
регуляторов
Для подготовки пульта
дистанционного управления
Примечания к пульту дистанционного
управления
227