Sony Handycam DCR-TRV828E Operating Instructions Manual page 151

Superimposing a still image in
the "Memory Stick" on an image
– MEMORY MIX
M. CHROM
M. LUMI
C. CHROM
M. OVERLAP*
* The superimposed image using Memory
overlap function can be recorded on tapes only.
Recording superimposed
images on a tape
Before operation
•Insert a Hi8 /Digital8
into your camcorder.
•Insert a "Memory Stick" is recorded still images
into your camcorder.
(1) Set the POWER switch to CAMERA.
(2) Press MEMORY MIX in the standby mode.
The last recorded or last composed image
appears on the lower part of the screen as a
thumbnail image.
(3) Press MEMORY+/– to select the still image
you want to superimpose.
To see the previous image, press MEMORY –.
To see the next image, press MEMORY+.
(4) Turn the SEL/PUSH EXEC dial to select the
desired mode.
The mode changes as follows:
M. CHROM y M. LUMI y C. CHROM y
M. OVERLAP
(Continued on the following page)
Still image/ Moving image/
Blue/Голубой фон
Still image/ Moving image/
Still image/ Moving image/
Still image/
tape for recording
Наложение неподвижного изображения
из "Memory Stick" на подвижное
изображение – MEMORY MIX
Moving image/
Blue/Голубой
фон
Запись наложенного
изображения на ленту
Перед началом работы
•
•
(1)
(2)
(3)
(4)
y y y
151