Carscop CCTR-803G Manual page 13

SMS to the authorized phone number. If the tracker is triggered continually, every authorized phone will receive
max 3 alarm SMS per hour. The over speed alarm SMS is as follow:
Over Speed Alarm, current speed:XXX km/h
After disable the over speed alarm, the system will not check speed again. Also send SMS
"CANCELALARM*123456" to the tracker can cancel this alarm setting.
7. Set Geo-fence Alarm by Sending SMS
Send SMS
"GEOFENCEALARMOFF*123456"
"GEOFENCEALARMON" or "GEOFENCEALARMOFF" is a command, "123456" is password, "XXX" is the
setting geo-fence radius, unit is km, the origin of the geo-fence is current location, the tracker will send back
the information "Set Geo-fence Alarm ON" or "Set Geo-fence Alarm OFF" to indicate the operation is success,
if the password is not right, the operation is fault, the tracker will send back information "Wrong Password".
After enable geo-fence alarm, the tracker will locate immediately, and set the current location as the origin
of the geo-fence circle, the XXX km is the radius of the geo-fence circle, the tracker will check the location is in
the geo-fence circle or not after uploading the location to server every time, If the current location is out of the
setting geo-fence circle, the tracker will send alarm and location information by SMS to the authorized phone
number. If the tracker stop move, the tracker will not check geo-fence alarm. If the tracker is triggered
continually, every authorized phone will receive max 3 alarm SMS per hour. The geo-fence alarm SMS is as
follow:
Geo-fence Alarm, Battery: 88%
8. Check Alarm Setting
Send SMS "ALARM*123456" to the tracker number, "ALARM" is command, "123456" is password, the
tracker will send back the information of the alarm setting, for example:
Shock Alarm:OFF,Geo-Fence Alarm:OFF,Over Speed Alarm:OFF,Power Down Alarm: ON,
Calling:ON,SMS:ON, Battery:88%.
9. Cancel All Alarm Setting
Send SMS "CANCELALARM*123456" to tracker, "CANCELALARM" is a command, "123456" is password,
the tracker will send back information "All Alarm Cancel", and cancel all the shock alarm setting in the tracker. if
the password is not right, the operation is fault, the tracker will send back information "Wrong Password".
Note: RESET and FACTORY also can cancel all alarm setting, about the difference please see above.
10. Listening or Monitor sound around tracker
Send SMS "LISTEN*123456" to tracker, "LISTEN" is a command, "123456" is password, then the tracker
will make a call back to the SMS sender, user pick up the calling and then the sound around the tracker can be
"GEOFENCEALARMON*123456*XXX"
(Disable
(Enable
Geo-fence alarm)
-13-
Geo-fence
to the tracker
alarm) or
SIM number,