Setting The Aux Send Level - Yamaha 02R Version 2 Manual

Setting the Aux Send Level

In this tutorial, MIC/LINE 1 channel is sent to AUX 1.
1. Press the [AUX 1] button.
The AUX 1 1/1 page shown below appears.
AUX 1
The faders change from channel level controls to aux send level controls. To
FADER STATUS
INPUT indicate the change, the AUX LED of the FADER STATUS indicator
AUX
illuminates. The number indicator corresponding to the current AUX
1 2 3 4
button (in this case, AUX 1) is also illuminated. The faders automatically
5 6 7 8
move from their channel level positions to the aux send level positions.
Note: Avoid blocking the fader movements when the faders move to their aux
send positions by placing objects on the 02R. It is possible to damage the faders.
Although the faders have moved to the auxiliary send level positions, the
02R remembers the channel signal levels.
2. Select MIC/LINE 1 using the [SEL] buttons or the CURSOR buttons.
Turn the aux send on by pressing the [AUX 1] button and then the [ON]
button in the AUX group of the SELECTED CHANNEL controls. The
default is for the send to be ON, therefore this step is not usually required.
Note: In order to change the aux send status from on to off, you must first select
the send channel with the corresponding button of the SELECTED
CHANNEL—AUX controls
3. To change the aux send from post to pre fader, press the [ENTER]
The PRE icon becomes the POST icon and is highlighted when the signal is
pre-fader.
Secondary Recording Tutorial
button.
43
02R Getting Started Guide