hager SC901AX Manual page 4

Each kit comprises the following (minimum):
• An outdoor caller unit installed on the road side, for visitors.
• A controller installed on the same pillar but on the garden side. This controller provides:
- the radio link with the interior handset unit,
- the power supply to the outdoor caller unit and controller,
- the connections to the electrical lock or latch and gate motorisation system.
These products are connected via a cable that either goes through or around the pillar.
• An interior handset unit (base and handset) for receiving calls and remotely controlling:
- the electrical locks or latches,
- the gate motorisation system,
- the automatic garage door control system (1),
- lighting (1),
- communication with another handset (2),
- doorphone programming.
Using the outdoor caller unit, access is controlled using:
• an access code,
• a tag reader.
Identifying each user with a tag
The outdoor caller units have a front panel with a tag
reading zone allowing each user to control access quickly
once the tag has been identified.
Holding the tag up to the name label dispenses the user
from entering the access code.
The outdoor caller unit with keypad can manage up to 16
different tags. Each tag must be registered on the caller
unit.
1) Via output receiver.
2) Requires a minimum of 2 handsets.
Mr et Mme Evêque-Mourroux
The tag is detected in this zone at a
maximum distance of 20 mm.
G
215