hager SC901AX Manual page 36

7.2.2 Handset on battery-operated base
1. Take the fixing T and put it to one side
during handset charging before installation
(see Charging the handset before
installation/handset on battery-operated
base).
Mark 3 fixing holes and drill a hole in the
wall with a Ø 6 mm drill it.
Roughly 1.2 m high
3. Remove the handset from the base.
2. Insert the washer and fix the T using
appropriate screws and washers.
Pozidriv 2
4. IMPORTANT: the removable transparent cover
must be in place when fixing the base to the
wall. Clip it back on if this is not the case.
G
247