Table of Contents
Advertisement
G
6. Testing the radio range
Before installing the handset base, make sure the radio range between the handset and the
controller(s) is good.
1. Stand in the place you wish to install the
handset unit and quickly press the
2. If you have several access points:
select the access point from where you
would like to listen in to background sounds
using the keys
then
3. You can hear what is happening around the
outdoor caller unit at the selected access
point. Reception is good if at least 3 bars
are displayed.
If this is not the case, move the handset.
4. Press on the
range again for each access point.
IMPORTANT: if the handset units or controllers are too close to each other when you are testing the radio
link, this may generate interference (Larsen effects, crackling, etc.). Move the various devices over 3 metres
away from each other.
242
.
key and test the radio
key.
C
Radio range bar graph
C
Advertisement
Table of Contents
