Connecting The Equipment - hager SC901AX Manual

G
3. Insert a washer and fix the bottom and
then the top of the bracket.
Fixing without a washer
Pozidriv 2
5. Lock the base in place using the locking
screw.
Pozidriv 2

5.3 Connecting the equipment

1. To make it possible to thread the cables
through (for the outdoor caller unit,
external power supply, motorisation
system, etc.), remove the grommets and
pierce a hole with the same diameter as
the cable using a Philips screwdriver.
234
Detach and
dispose of
unused washers
Fixing with a washer
4. Hook the base on to the fixing bracket.

2. Cut the cables to the necessary length
and then thread them through the
grommets. Expose the end of the wires
over a length of approximately 1 cm.
The cables must be
entirely unwound.
Œ