Table of Contents
Advertisement
G
10.3 In the handset
When you change the controller batteries, it is also advisable to change the handset batteries.
1. Take the handset off its base and remove
the belt clip by pressing on one of its
sides.
3. Replace the flat MTU01X battery with a
new once.
5. Programme the time using
and
The temperature display will be updated
several minutes after the handset has
been powered.
278
.
C
2. Insert a flat screwdriver into the slot and
press to open the handset.
4. Close the handset, put the belt clip back
on and then place the handset back on
its base in order to start it up.
3.5
If necessary, the
icon
flashes to indicate that the
handset is charging.
Advertisement
Table of Contents
