Type K/J Thermometer; Data Hold; Data Record ( Max., Min. Reading ) - Lutron Electronics AM-4234SD Operation Manual

4-7 Type K/J thermometer

a. Function select to " Type K/J thermometer ",
refer to page 10.
b. Plug the Thermocouple Temp. Probe ( Type K Temp.
probe pr Type J Temp. probe, optional ) into " Type
K/J Probe Input Socket " ( 3-10, Fig. 1 )
The Display will show the measuring value that
sensing from the Temp. probe.
c. If the Display show the indicator " K ", it is ready
for Type K thermometer.
If the Display show the indicator " J ", it is ready
for Type J thermometer.
Remark :
The meter is defaulted to " Type K thermometer ".
If intend to select the " Type J thermometer with
default , please refer chapter 7-8, page 26.

4-8 Data Hold

During the measurement, press the " Hold Button " ( 3-3,
Fig. 1 ) once will hold the measured value & the LCD will
display a " HOLD " symbol.
Press the " Hold Button " once again will release the data
hold function.

4-9 Data Record ( Max., Min. reading )

1) The data record function records the maximum and
minimum readings. Press the " REC Button " (
3-4, Fig. 1 ) once to start the Data Record function and
there will be a " REC " symbol on the display.
2) With the " REC " symbol on the display :
a) Press the " REC Button " ( 3-4, Fig. 1 ) once, the
" REC MAX " symbol along with the maximum value
will appear on the display.
b) Press the " REC Button " ( 3-4, Fig. 1 ) again, the
" REC MIN " symbol along with the minimum value
will appear on the display.
15