Receiving And Inspecting - WhisperKool XLT SERIES XLT 1600 Owner's Manual

Customer Warranty Registration
PLEASE COMPLETE AND RETURN THE REGISTRATION/WARRANTY CARD UPON RECEIPT OF THE UNIT.
By completing the Product Registration Card, you will be confirmed in our customer database ensur-
ing that your information is on file to help you obtain efficient warranty service.
Please refer to pages 30 and 31 for complete terms and conditions, warranty guidelines, and
policy for your WhisperKOOL Extreme Series cooling unit.
Receiving and Inspecting the Unit
Please examine the WhisperKOOL packaging for any damage to the carton. Note any damage
on the original bill of lading, shipper's receipt, or airbill. Damaged merchandise, including
unstable cabinets, should not be accepted. Contact WhisperKOOL Customer Service at 1-800-
343-9463 ext.799 immediately if you have a defective or damaged product.
Do not attempt to install any unit with cosmetic damage. This includes (but is not limited to)
bent flange and/or brackets. A representative will file a claim with the shipping company,
arrange for a replacement unit to be shipped to you and for the original unit to be picked up.
In some instances, an inspection must take place at the point of receipt, in which case you will
be contacted by the shipping company to schedule an appointment to inspect the damaged
goods.
Please leave the WhisperKOOL System in its original box until you are ready for installation. This
will allow you to move the product safely without damaging it. When you are ready to remove
the product from the box, see Installation on page 10.
Note: Save your box and all packing materials. They provide the only safe means of
transporting the unit.
Contents:
• Owner's Manual
• By-Pass Plug
• Registration/Warranty Card
• Insulation Foam (4 strips)
• 8 - 1 3/4" Screws (18 for WK 6000 & 8000)
• Power Cord
• Drain Line with Brass Fitting
• Thermostat
Page 3
RECEIVING & INSPECTING THE UNIT
XLT 020111