Brymen BM079 User Manual page 19

Electrical Specifications
Accuracy is ±(% reading digits + number of digits) or otherwise specified, at 23°C ±
5°C.
Maximum Crest Factor < 2.5 : 1 at full scale & < 5 : 1 at half scale or otherwise
specified, and with frequency spectrum not exceeding the specified frequency
bandwidth for non-sinusoidal waveforms.
DC Voltage
RANGE
600.0V
Input Impedance: 10MΩ, 100 pF nominal
AC Voltage (with Digital Low-Pass Filter)
RANGE
50Hz ~ 60Hz
600.0V
Input Impedance: 10MΩ, 100 pF nominal
DC+AC Voltage (with Digital Low-Pass Filter) (Models 079 & 078 Only)
RANGE
DC, 50Hz ~ 60Hz
600.0V
Input Impedance: 10MΩ, 100 pF nominal
PEAK-rms (ACV & ACA of Models 079, 078 & 076 only)
Response: 80ms to > 90%
Audible Continuity Tester
Audible Threshold: At between 10Ω and 250Ω
Response time: 32ms approx.
Ohm
RANGE
600.0Ω, 6.000KΩ, 60.00KΩ
Open Circuit Voltage: 1.0VDC typical
Accuracy
1.0% + 5d
Accuracy
1.0% + 5d
Accuracy
1.2% + 7d
Accuracy
1.0% + 5d
18