Chapter 3 Keyboard
3-5.
Example of parameter settings
3-5-1.Instructions on viewing and modifying function code
PI500-E inverter‟s operation pane is three levels menu for parameter setting etc.Three levels:
function parameter group (Level 1)→function code(level 2)→function code setting(level 3). The
operation is as following:
Description: Back to the level 2 menu from level 3 menu by PRG key or ENTER key in the
level 3 operation status. The differences between the two keys : ENTER will be back to the level 2
menu and save parameter setting before back, and transfer to the next function code automatically;
PRG will be back to the level 2 menu directly, not save parameter setting, then back to current
function code.
Example 1 Frequency setting to modify parameters
Set F0.01 from 50.00Hz to 40.00Hz
Example 2 :Restore factory settings
Without twinkling parameter position, the function code can not be modified in the level 3
menu. The reason maybe as following:
1) The function code can not be modified itself, eg: actual detecting parameters, running
record parameters.
Power-on
Shutdown parameter display
PRG
PRG
Change parameter group
First-level menu display
ENTER
Change function parameter selection
PRG
Second-level menu display
ENTER
ENTER
Change function parameter value
PRG
Third-level menu display
Figure 3-2:operation processes
Flicker
ENTER
PRG
Press
Press
PRG
Press
Flicker
▲
PRG
Press
Press
PRG
Press
ENTER
Press
PRG
Press
Flicker
Flicker
ENTER
▲
Press
Press
ENTER
Press
PRG
Press
Flicker
Flicker
ENTER
Press
Press
▲
Press
Flicker
14
Flicker
▼
Press
Flicker
ENTER
Flicker