[Load All User Data]; [Hdmi Cec] - Panasonic DLP PT-FRZ60 Operating Instructions (Functional Manual)

2) Press the <ENTER> button.
f The [SECURITY PASSWORD] screen is displayed.
3) Enter a security password and press the <ENTER> button.
4) When the confirmation screen is displayed, press qw to select [OK], and press the <ENTER> button.
f [PROGRESS] is displayed while saving data.
Note
f Data set from the computer application is not included in [ALL USER DATA].

[LOAD ALL USER DATA]

Load the various setting values saved as a backup in the built-in memory of the projector.
1) Press as to select [LOAD ALL USER DATA].
2) Press the <ENTER> button.
f The [SECURITY PASSWORD] screen is displayed.
3) Enter a security password and press the <ENTER> button.
4) When the confirmation screen is displayed, press qw to select [OK], and press the <ENTER> button.
Note
f The projector enters the standby mode to reflect the setting values when [LOAD ALL USER DATA] is executed.
f Data registered from a computer is not included in [ALL USER DATA].

[HDMI CEC]

Sets the CEC (Consumer Electronics Control) function of HDMI.
CEC is a function that is realized by exchanging device control signals with external devices connected with
an HDMI cable. Using the remote control of the projector, it is possible to operate the CEC-compatible external
device (hereinafter referred to as "CEC-compatible device") and to control the power on/off link status between the
projector and the CEC-compatible device.
For details on how to use the CEC function, refer to "Using HDMI-CEC function" ( x page 152).
1) Press as to select [HDMI CEC].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[ON]
[OFF]
Operating a CEC-compatible device
Operate the CEC-compatible device connected to the <HDMI 1 IN> terminal or <HDMI 2 IN> terminal.
[HDMI-CEC OPERATION] can be operated when HDMI1 input or HDMI2 input is selected. Switch to the input that
is corresponding to the CEC-compatible device you want to operate in advance.
1) Press as to select [HDMI CEC].
2) Press qw to select [ON].
3) Press the <ENTER> button.
f The [HDMI CEC] screen is displayed.
4) Press as to select [HDMI 1] or [HDMI 2].
f Select the input corresponding to the CEC-compatible device you want to operate.
f Proceed to Step 6) when the device to operate is displayed.
5) Press qw to switch the item.
f The devices will switch when multiple CEC-compatible devices are connected to one input.
f Select the device to operate.
6) Press as to select [HDMI-CEC OPERATION].
110 - ENGLISH
Chapter 4 Settings — [PROJECTOR SETUP] menu
Enables the CEC function.
Disables the CEC function.