[Control Device Password Change] - Panasonic DLP PT-FRZ60 Operating Instructions (Functional Manual)

5) Press as to select [CONTROL PANEL] or [REMOTE CONTROL].
6) Press qw to switch [USER].
7) Press as to select the button item to set.
f When [INPUT SELECT BUTTON] is selected in [REMOTE CONTROL], press the <ENTER> button, and
then press as to select the button to set.
[POWER BUTTON]
[INPUT SELECT BUTTON]
[MENU BUTTON]
[AUTO SETUP BUTTON]
[ON SCREEN BUTTON]
[OTHER BUTTON]
8) Press qw to switch the item.
[ENABLE]
[DISABLE]
f When [INPUT SELECT BUTTON] is selected in Step 7), pressing the <MENU> button returns to the
[CONTROL PANEL] screen or the [REMOTE CONTROL] screen once the item is switched.
9) Press as to select [APPLY], and press the <ENTER> button.
f The confirmation screen is displayed.
10) Press qw to select [OK], and press the <ENTER> button.
Note
f When a button operation is performed on the device set to [DISABLE], the [CONTROL DEVICE PASSWORD] screen is displayed.
Enter the control device password.
f The [CONTROL DEVICE PASSWORD] screen will disappear when there is no operation for approx. 10 seconds.
f If the operations of both [CONTROL PANEL] and [REMOTE CONTROL] are set to [DISABLE], the projector cannot be turned off (cannot
enter standby).
f When the setting has completed, the menu screen will disappear. To operate continuously, press the <MENU> button to display the main
menu.
f Even when you set button operations on the remote control disabled, operations of the <ID SET> and <ID ALL> buttons on the remote
control are kept enabled.

[CONTROL DEVICE PASSWORD CHANGE]

The control device password can be changed.
1) Press as to select [CONTROL DEVICE PASSWORD CHANGE].
2) Press the <ENTER> button.
f The [CONTROL DEVICE PASSWORD CHANGE] screen is displayed.
3) Press asqw to select the text, and press the <ENTER> button to enter the text.
4) Press asqw to select [OK], and press the <ENTER> button.
f To cancel, select [CANCEL].
Attention
f The initial password is "AAAA" as the factory default or when the [PROJECTOR SETUP] menu → [INITIALIZE] → [ALL USER DATA] is
executed.
f Change the password periodically that is hard to guess.
f To initialize your password, consult your distributor.
Chapter 4 Settings — [SECURITY] menu
[CONTROL PANEL]
Power < v / b >button
<INPUT SELECT> button
<MENU> button
―
―
asqw , <ENTER> button
Enables button operations.
Disables button operations.
Buttons that can be set
[REMOTE CONTROL]
<COMPUTER 1> button, <COMPUTER 2>
button, <VIDEO> button, <HDMI 1> button,
<HDMI 2> button, <DIGITAL LINK> button
<AUTO SETUP> button
<ON SCREEN> button
Buttons not listed above
ENGLISH - 119