Table of Contents
Advertisement
f The password cannot be blank.
8)
After entering the password, press asqw to select [OK], and press the <ENTER> button.
f The [ADMINISTRATOR ACCOUNT] screen is displayed.
9)
Press as to select [PASSWORD CONFIRM], and press the <ENTER> button.
f The [PASSWORD CONFIRM] screen is displayed.
10) Enter the password entered in Step 7).
11) After entering the password, press asqw to select [OK], and press the <ENTER> button.
f The [ADMINISTRATOR ACCOUNT] screen is displayed.
12) Press as to select [STORE], and press the <ENTER> button.
f The confirmation screen is displayed.
13) Press qw to select [OK], and press the <ENTER> button.
Note
f For restrictions on character strings that can be set for password, refer to [PASSWORD POLICY] ( x page 123) .
f If the password of the administrator account has not been set, that is, if it is left blank, the network function of this projector cannot be used.
Set a password before using the web control function or the communication control (including operation with application software) via LAN.
f The user name and password of a standard user account without administrator rights can be set on the [Set up password] page ( x page 147)
of the web control screen.
Changing settings of the administrator account
Change the user name and password of the administrator account.
1)
Press as to select [ADMINISTRATOR ACCOUNT].
2)
Press the <ENTER> button.
f The [ADMINISTRATOR ACCOUNT] screen is displayed.
3)
Press as to select [USER NAME] under [CURRENT], and press the <ENTER> button.
f The [USER NAME] screen is displayed.
4)
Press asqw to select a character, and press the <ENTER> button.
f Enter the current user name.
5)
After entering the user name, press asqw to select [OK], and press the <ENTER> button.
f The [ADMINISTRATOR ACCOUNT] screen is displayed.
6)
Press as to select [PASSWORD] under [CURRENT], and press the <ENTER> button.
f The [PASSWORD] screen is displayed.
7)
Press asqw to select a character, and press the <ENTER> button.
f Enter the current password.
8)
After entering the password, press asqw to select [OK], and press the <ENTER> button.
f The [ADMINISTRATOR ACCOUNT] screen is displayed.
9)
Press as to select [USER NAME] under [NEW], and press the <ENTER> button.
f The [USER NAME] screen is displayed.
10) Press asqw to select a character, and press the <ENTER> button.
f Enter a new user name.
f Enter the current user name if you do not want to change it.
f Up to 16 characters can be entered.
11) After entering the user name, press asqw to select [OK], and press the <ENTER> button.
f The [ADMINISTRATOR ACCOUNT] screen is displayed.
12) Press as to select [PASSWORD] under [NEW], and press the <ENTER> button.
f The [PASSWORD] screen is displayed.
13) Press asqw to select a character, and press the <ENTER> button.
124 - ENGLISH
Chapter 4 Settings — [NETWORK] menu
Advertisement
Chapters
Table of Contents
