INSTALLATION PILOT , PANEL AND
WINDSHIELD.
1) Locate items necessary to install pilot ,
the panel and windshield.
.
2) A scale pilot is included with this ARF.
The Pilot included fits well in the cockpit.
(or you can order others scale pilot fig-
ures made by SG Models. They are avail-
able at SG Models distributors.).
If you are going to install a pilot figure,
please use a sanding bar to sand the base
of the figure so that it is flat.
3) Position the pilot figure on the cock-
pit floor as shown. Use epoxy to glue the
base of the pilot figure, please see pictures
as shown.
Epoxy.
100mm
2x8mm
29