Table of Contents
Advertisement
REPLACING THE LIGHT
1.
Disconnect the oven from the power supply .
2.
Unscrew the cover from the light, replace the
bulb and screw the cover back on the light .
3.
Reconnect the oven to the power supply .
LOWERING THE UPPER HEATING ELEMENT
1.
Remove the heating element from its seating .
2.
Lower the heating element .
Please note: Use 25 W/230 V type G9, T300 °C halogen
lamps.
The bulb used in the product is specifically designed for
domestic appliances and is not suitable for general room
lighting within the home (EC Regulation 244/2009).
Light bulbs are available from our After-sales Service.
- Do not handle bulbs with your bare hands as your
fingerprints could damage them. Do not use the oven
until the light cover has been refitted.
3.
To return the heating element to its position,
lift it up, pull it slightly towards you and make sure
that the tab support is in its proper seating .
EN
23
Advertisement
Table of Contents
