Changing The Stamp Position - Ricoh Gestetner DSm790 Operating Instructions Manual

A
Press [Stamp].
B
Press [Stamp Text].
C
Press [Change Text].
D
Enter stamp text, and then press [OK].
E
Press [All Pages] or [1st Page Only] to select the print page.
F
Place originals, and then press the {Start} key.
Note
❒ If the Main Power is turned off, the text is cleared. To save the typed text,
you can program them.
Reference
"Stamp", General Settings Guide

Changing the stamp position

A
Press [Change] under Stamp Position.
B
Select the desired position, and then press [OK].
Copier Functions
2
125