Mixed Size Mode - Ricoh Gestetner DSm790 Operating Instructions Manual

Mixed size mode

In Mixed size mode, you can place originals of various sizes in the ADF at the
same time if their widths are the same.
Important
❒ When placing originals of different sizes in the ADF and making copies with-
out using the Mixed size mode, paper might become jammed or parts of the
original image might not be copied.
❒ You can place originals that weigh 52-81 g/m
❒ The sizes of the originals that can be placed in this mode are follows:
• Metric version
A3L and A4K, B4 JISL and B5 JISK, A4L and A5K
• Inch version
11" × 17"L and 8
❒ You can place two different sizes of originals in the ADF at the same time.
A
Press [Mixed Sizes].
B
Align the rear and left edges of the originals as shown in the illustration.
A Place the originals into the ADF
B
Vertical size
C
Adjust the guide to the original size.
D
Place the originals in ADF.
E
Press the {Start} key.
" × 11"K, 8 " × 11"L and 5
1 1
/ /
2 2
2
(45-70 kg).
" × 8
1 1
/ /
2
ANP073S
Placing Originals
"K
2
25
1