When Copying Onto Custom Size Paper - Ricoh Gestetner DSm790 Operating Instructions Manual

Copying

When copying onto Custom Size Paper

Makes copies onto custom size paper from the multi bypass tray.
A
Fit the side fence to the paper size, and then place paper in the multi bypass
tray (Tray 7).
B
Fit the end fence to the paper, and then press the elevator switch on the
2
multi bypass tray (Tray 7).
C
Select the multi bypass tray (Tray 7) on the control panel.
D
Press the {q} key.
E
Press [Program Custom Size].
F
Enter the horizontal size of the original with the number keys, and then
press [q].
G
Enter the vertical size of the original with the number keys, and then press
[q].
H
Press [OK] twice.
Note
❒ If you make a mistake in step
then enter the value again.
❒ To register the custom size entered in
it] in the confirmation screen.
46
, press [Clear] or the {Clear} key, and
F G
or
G
, press [Program] and then press [Ex-