Table of Contents
Advertisement
Item
Photo
Pale
Generation Copy
Dark Background
Panel Features Default
Image Adjustment Priori-
ty
Paper Display
Original Type Display
Special Original Display
Special Original Display
Defaults
Tone: Original Remains
Job End Call
Connect Copy Key Dis-
play
Switch Original Counter
Display
Customize Function: Cop-
ier
Customize Function: Doc-
ument Server Storage
Description
You can adjust the quality of finished images according to the type
of photo original.
"Printed Photo" is set for magazine and catalog photo originals.
You can smooth photos by selecting "Printed Photo".
"Glossy Photo" is set for the silver-salt photos printed from photo
film.
If you select "Normal", you can finish characters that exist together
in a photo block.
You can adjust the image quality of a pale original so the copy is at
normal density.
You can adjust the image quality to prevent characters in the copy
becoming too thick.
You can set whether "Deep document" can be selected as an orig-
inal type.
You can set which items will appear as the function buttons on the
basic display.
You can set the items, to be preferentially displayed, to the func-
tion buttons on the basic display.
You can choose to have the available paper trays and sizes shown
on the initial display.
You can have the original types shown on the initial display.
You can set whether to show the original types on the initial display.
You can set up to three items for displaying on the initial display
from five items.
You can set whether to use a buzzer to alert you when you forget
to remove an original.
You can set whether to generate a buzzer sound ("pi") when a copy
is completed.
If "Panel key sound" when performing system settings is set to
"On", the buzzer sounds four times if copying is interrupted be-
cause the paper has run out or become jammed. This notifies you
that the copy job could not be completed.
You can set whether to display [Connect Copy]. If you select "Off",
the key does not appear and a master unit cannot be obtained.
You can set whether to count the two-sided documents by number
of sheets or pages.
A maximum of four often-used functions can be registered to the
function keys.
A maximum of four often-used functions can be registered to the
function keys. Registered functions can also be changed.
7
Advertisement
Table of Contents
