Table of Contents
Advertisement
Placing Originals
A
Press [Original Size].
1
B
Press [Custom Size].
C
Enter the horizontal size of the original with the number keys, and then
press the {q} key.
D
Enter the vertical size of the original with the number keys, and then press
the {q} key.
E
Press [OK].
F
Place the originals, and then press the {Start} key.
Note
❒ If [Original Size] is not displayed on the screen, set [Original Size] with [Special
Original Display Defaults]. See "Copier/Document Server Features", General
Settings Guide.
❒ If you make a mistake in step
then enter the value again.
❒ To register the custom size you have entered, press [Program]. A confirma-
tion message appears. Press [Yes]. Press [Recall] to specify a registered cus-
tom size.
Reference
"Copier/Document Server Features", General Settings Guide
28
C
D
, press [Clear] or the {Clear} key, and
or
Advertisement
Table of Contents
