Download Print this page

Power Supply For Camera - Foxtech Map-02 User Manual

Mapping camera

Hide thumbs Also See for Map-02:

Table of Contents

FOXTECH Map-02 Mapping Camera

User Manual

Power Supply for Camera

Power Connection: Connect the 2S (DC8.4V) positive wire to camera Pin 2(+), and negative wire to camera

Pin 1(GND-).

Don't operate the camera immediately after power-on. After 15s self-checking, the camera will acquire the

usual parameters for mapping, and it can meet he requirements of most missions. You also could set up the

parameters by the menu button on the top of the camera.

This content is subject to change.

Download the latest version from

https://www.foxtechfpv.com/foxtech-map-01-camera.html

For everyday updates, please follow Foxtech facebook page"Foxtechhobby".

YouTube Channel:

Foxtech

Table of Contents

Need help?

Do you have a question about the Map-02 and is the answer not in the manual?