JASON Hydrotherapy integrity B3260TL Owner's Manual

JASON Hydrotherapy integrity B3260TL Owner's Manual

Hide thumbs Also See for integrity B3260TL:

Advertisement

Quick Links

"to be removed for use by the occupant."
Jason International, Inc.
8328 MacArthur Drive
North Little Rock, AR 72118
www.jasoninternational.com
INsTallaTION, OPeraTION, aND MaINTeNaNCe
If the carton shows sign of damage, inspect
the product before accepting and describe the
problem on the Bill of lading.

INSPECTION

Inspect the unit prior to installation. In the event of a problem, DO
NOT install the unit. All components are factory assembled onto
the bath and the unit is water tested and inspected prior to
leaving the factory.
The installer is responsible for inspecting the unit to insure that
it is free from defects and/or shipping damage. The factory
is not responsible for damage that might have been avoided
by inspection or testing prior to installation.
NOTe: Transportation and insurance from Jason's factory are
the buyer's responsibility.
Damage sustained in transit is the responsibility of the carrier.
The owner or installer MUST open, uncrate, and
inspect the unit for damage when it is delivered. Inspect
plumbing and surface for missing or damaged components.
Alert the dealer of any discrepancies. If damage is discovered,
immediately notify the carrier in writing and request that they
have a representative inspect the unit. If the carrier fails to
respond, report it to the seller and carrier. Always file a freight
claim promptly.
CauTION: DO NOT lIFT Or haNDle The BaTh BY ITs PluMBING.
OwNer's reCOrD
Dealer:
Date Purchased:
Date Installed:
Installer:
Jason International, Inc. • 501.771.4477
OwNer's MaNual
Integrity
soaking Baths
TM
Page 1 of 5
Damage to the unit during installation will not be covered
by warranty and is the responsibility of the installer. all
Warranty ClaIMs ON aCrYlIC surFaCe DaMaGe MusT Be
MaDe PrIOr TO INsTallaTION.
To protect the unit from damage, keep the bath in its carton
until ready for installation.
EQUIPMENT ACCESS
In accordance with Building Codes, service access to all
therapy bath equipment, controls and electrical connections
must be provided during installation. (Refer to Table 1 -
Specifications on page 2 for minimum access size.) Insufficient
access will hinder repair and maintenance. Warranty service
will not cover the cost of providing equipment access.
Jason offers an optional removable lateral skirt for all
rectangular baths. The skirts are available in matching acrylic
colors and provide convenient access to bath equipment as
well as an excellent finished appearance.
PlaCe serIal NuMBer CarD wITh
PrODuCT CONFIGuraTION IN ThIs BOx
49-1000-023
Date 05/08
Customer Service : 800.255.5766

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the integrity B3260TL and is the answer not in the manual?

Questions and answers

Summary of Contents for JASON Hydrotherapy integrity B3260TL

  • Page 1 “to be removed for use by the occupant.” Jason International, Inc. 49-1000-023 8328 MacArthur Drive Date 05/08 North Little Rock, AR 72118 www.jasoninternational.com OwNer’s MaNual Integrity soaking Baths INsTallaTION, OPeraTION, aND MaINTeNaNCe If the carton shows sign of damage, inspect Damage to the unit during installation will not be covered by warranty and is the responsibility of the installer.
  • Page 2 INSTALLATION INSTRUCTIONS INSTALLATION Follow these instructions to install the soaking bath vessel, overflows, fill spouts, and faucetry. Electrical connection is SPECIFICATIONS TABLE not needed. INTeGrITY COlleCTION see the user MaINTeNaNCe INsTruCTIONs on page 4 for humidity Overall Operating Floor Dimension Capacity loading and mold prevention suggestions prior to Installation.
  • Page 3 Installation Instructions (cont.) CLEANING WATER TESTING Before finishing the installation, it is recommended that the 1. remove all loose debris. Construction plaster or excess grout bath and plumbing tested for leaks. can be removed with the use of a wooden-edged trowel. 1.
  • Page 4 USER MAINTENANCE INSTRUCTIONS hUMIdITy CLEANING With minimum care, the soaking bath’s acrylic-surface will retain warning: avoid high humidity levels in your home. Mold, mildew, its high luster finish for many years. For regular cleaning use fungi, and bacteria which may be harmful to health thrive in areas with continued high humidity levels;...
  • Page 5 IMPOrTaNT saFeTY INsTruCTIONs INSTRUCTIONS PERTAINING TO THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS. warNING: When using this unit, basic precautions should always be followed, including the following: This manual contains information and instructions for proper operation and maintenance of your bath. Failure to follow these instructions could result in personal injury, electrical shock or fire.

Table of Contents