Download Print this page
Metra Electronics 108-TO6HG Installation Instructions

Metra Electronics 108-TO6HG Installation Instructions

For toyota rav4 2019-up

Advertisement

Quick Links

KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) #4 x 3/8" Phillips screws (4)
A
Metra. The World's Best Kits.
®
Toyota RAV4
Visit
MetraOnline.com
specific applications
KIT FEATURES
• ISO DDIN radio provision designed for 8" Pioneer modular radios†
• Painted gloss black
† Refer to the radio manufacturer for current models
B
MetraOnline.com
2019-Up
for more detailed information about the product and up-to-date vehicle
C
© COPYRIGHT 2020 METRA ELECTRONICS CORPORATION
108-TO6HG
I N S TA L L AT I O N I N S T R U C T I O N S
Patent Pending
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Assembly ..........................................................3
WIRING & ANTENNA CONNECTIONS (sold separately)
Visit axxessinterfaces.com or metraonline.com
for harness and interface options
Antenna Adapter: 40-LX11
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• 10mm Socket wrench • Cutting tool
Attention!
Let the vehicle sit with the key
out of the ignition for a few minutes before
removing the factory radio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
key to ignition.
REV. 8/18/20 INST108-TO6HG

Advertisement

loading

Summary of Contents for Metra Electronics 108-TO6HG

  • Page 1 When testing the aftermarket equipment, ensure that all factory equipment is connected before cycling the key to ignition. Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2020 METRA ELECTRONICS CORPORATION REV. 8/18/20 INST108-TO6HG...
  • Page 2 DASH DISASSEMBLY 1. Remove the trim panel behind the radio. (Figure A) 2. Remove (4) 10mm screws securing the radio. Unclip and slide out the radio, then unplug and remove. (Figure B) 3. Remove the (6) screws on radio back and separate panels from around the factory radio face.
  • Page 3 KIT ASSEMBLY Pioneer Modular DDIN radio provision 6. Assemble the radio assembly into the factory radio panels using the outside Note: For steps 1 and 2, reference the (4) factory screws (screws are also installation manual provided with the radio provided if needed).
  • Page 4 Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2020 METRA ELECTRONICS CORPORATION REV. 8/18/20 INST108-TO6HG...