Configuring Ip Address - Planet WGS-4215-8P2S Quick Installation Manual

6.1 Configuring IP Address
The Wall-mount Managed Switch is shipped with default IP address shown below:
IP Address: 192.168.0.100
Subnet Mask: 255.255.255.0
To check the current IP address or modify a new IP address for the Switch, please
use the procedure as follows:
 Display of the Current IP Address
1. At the "#" prompt, enter "show ip".
2. The screen displays the current IP address shown in Figure 6-2.
 Configuration of the IP Address
3. At the "#" prompt, enter the following command and press <Enter> as shown
in Figure 6-3.
WGS-4215-8P2S# configure terminal
WGS-4215-8P2S (config)# ip address 192.168.1.100 mask 255.255.255.0
WGS-4215-8P2S (config)# ip default gateway 192.168.1.254
16
Figure 6-2: IP Information Screen