Telnet Login - Planet WGS-4215-8P2S Quick Installation Manual

6. Telnet Login

The Wall-mount Managed Switch also supports Telnet for remote management.
The switch asks for user name and password for remote login when using Telnet;
please use "admin" for both username and password.
Default IP address: 192.168.0.100
Username: admin
Password: admin
Figure 6-1: Wall-mount Managed Switch Telnet Login Screen
The user can now enter commands to manage the Wall-mount Managed Switch.
For a detailed description of the commands, please refer to the following chapters.
For security reason, please change and memorize the new
1.
password after this first setup.
Only accept command in lowercase letter under console inter-
2.
Note
face.
15