Setting Menu; Using The Menu - Yaesu FTDX101MP Operation Manual

The Menu system of the FTDX101 series provides extensive customization capability. The transceiver
functions can be tailored for the most demanding operators. The Setting Menus are grouped into five spe-
cific utilization categories.
CW operating Setting
SSB, AM, FM & Data Communication
(such as RTTY)

Using the Menu

1. Press the [FUNC] key.
2. Touch the category item that is to be set (see above).
3. Touch the desired item.
4. Touch the item setting that is to be changed.
5. Touch the desired setting, or turn the [MULTI] knob to change the setting.
6. Press the [FUNC] key to save the new setting and exit the Setting Menu.
7. Press the [FUNC] key to exit to normal operation.
Use this procedure to restore the Menu settings to their factory defaults, without affecting the Pro-
grammed Frequency Memories.
1. Press the [FUNC] key.
2. Select [EXTENSION SETTING] → [RESET] .
3. Touch "DONE" of the "MENU CLEAR" item.
The reset confirmation screen will be displayed.
4. Touch "OK" or press the [MULTI] knob to reset.
(Touch "CANCEL" to cancel the reset)
5. Once the power is turned OFF, it will turn ON automatically afterwards.
Setting Menu reset is complete.
Comprehensive settings such as: Transmit & Receive,
Interference Reduction, Memory, Scan, etc.
Reset the Setting Menu

Setting Menu

Display Setting
Date, SD Card Settings, Firmware
Version Display, Reset Operation.
83