Yaesu FTDX101MP Operation Manual page 108

TX TIME OUT TIMER
Function: Sets the Time-Out Timer countdown time.
Available Values: OFF / 1 - 30 min
Default Setting: OFF
Description: When the time-out timer function
is active, a beep is emitted when a
continuous transmission nears the
set time. About 10 seconds later, the
transceiver is forced to return to the
receiving mode.
MIC SCAN
Function: Activates the microphone automatic
scanning function.
Available Values: OFF / ON
Default Setting: ON
Description: Sets the operation of the UP/DWN
keys on the microphone.
ON: Starts scanning automatically by pressing
and holding the UP/DWN key for 1 second
or more (Scanning continues even after
releasing the button). To stop scanning,
press the UP/DWN key again briefly or
press the PTT button to transmit.
OFF: Scans only while pressing and holding the
UP/DWN key. To stop scanning, release
the button.
MIC SCAN RESUME
Function: Sets the Scan Resume function.
Available Values: PAUSE / TIME
Default Setting: TIME
Description:
PAUSE: During automatic scanning, the scanner
will hold until the signal disappears.
TIME: If the signal does not disappear within
five seconds, the scanner will resume
scanning for the next active channel
(frequency).
If there are no signals, the scanner con-
tin- ues scanning.
REF FREQ FINE ADJ
Function: Adjusts the reference oscillator.
Available Values: -25 - 0 - 25
Default Setting: 0
Description: The frequency may be calibrated
by connecting a frequency counter
to the transceiver, or by receiving a
standard frequency such as WWV or
WWVH.
CS DIAL
Function: Sets the Operation of MPVD dial when
the [C.S] key is pressed.
Available Values: RF POWER / MONI LVL /
DNR LVL / NB LVL / VOX GAIN
VOX DELAY / ANTI VOX
STEP DIAL / MEM CH
GROUP / R.FIL / LEVEL
Default Setting: MEM CH
Description:
RF POWER: Adjusts transmit output.
MONI LVL: Adjusts the Monitor volume.
DNR LVL: DNR level adjustment.
NB LVL: NB level adjustment.
VOX GAIN: VOX gain adjustment.
VOX DELAY: VOX delay adjustment.
ANTI VOX: ANTI VOX adjustment.
STEP DIAL: Set the Frequency Change Steps.
MEM CH: Selects the Memory Channels.
GROUP: Selects the Memory Group.
R.FIL: Selects the Roofing filter Pass
Band Width.
LEVEL: Adjust the level of the 3DSS dis-
play.
KEYBOARD LANGUAGE
Function: Selects the keyboard language.
Available Values: JAPANESE / ENGLISH(US)
ENGLISH(UK) / FRENCH
FRENCH(CA) / GERMAN
PORTUGUESE
PORTUGUESE(BR)
SPANISH / SPANISH(LATAM)
ITALIAN
Default Setting: Depends on the transceiver version.
103