Table of Contents
Advertisement
P90-BP36, BP48, BP72 User's Manual
External Battery Packs
Connecting with UPS and Other Battery Box
Follow below installation chart to connect with UPS and other battery box with included cable.
1st Battery Pack
2nd Battery Pack
Type of Battery Required
This battery box has been designed to operate with the following types of batteries:
36V/9Ah Version: 3 pieces of 12V 9Ah batteries per string
48V/9Ah Version: 4 pieces of 12V 9Ah batteries per string
72V/9Ah Version: 6 pieces of 12V 9Ah batteries per string
Battery Replacement
If your battery box is not installed with batteries, please follow proper procedure to put batteries inside of unit.
NOTE: MAKE SURE THAT THE BATTERY BOX IS DISCONNECTED FROM THE UPS BEFORE PERFORMING THE FOLLOW-
ING SEQUENCE OF OPERATIONS.
P90-BP36
Step 1 : Open the package and place the battery box on a horizontal plane.
Step 2: Remove the removable front panel part by pulling it from the lower extremity.
Xtreme Power Conversion Corporation
Page 5
Advertisement
Table of Contents
