Error Indicators - Hanseatic WQP8-J7636E User Manual

Freestanding dishwasher
Table of Contents

Advertisement

Available languages

Available languages

Page EN-30
Troubleshooting table
Problem
The dishes are not com-
pletely clean.

Error indicators

Code
E1
: It takes too long for
the water to fill up.
E3
: The heating element
is defective.
E4
: Water overflow
E8
:Internal fault
Possible cause
There are food scraps which
are encrusted onto the dish-
es.
The dishes have not been
stacked optimally.
You have selected the incor-
rect dishwashing programme.
The dishwasher detergent is
incorrectly dosed.
The water pressure is too low. Turn the water tap on completely.
The spraying arm can not ro-
tate unhindered.
The nozzles on the spraying
arm are blocked/calcified.
Solution
Turn the water tap on completely.
Arrange the inlet hose properly so that it is not kinked (see „Con-
necting the inlet hose" on page EN-24).
Ensure that the water pressure is correct. See „Technical specifi-
cations" on page EN-32.
Have the appliance checked and repaired.
Switch off the tap. Find the gap in the seal (or have someone find
it) and repair the leak (or have it repaired).
Have the appliance checked and repaired.
Solution
Soak dirty dishes prior to washing
the dishes.
Stack the dishes in such a way that
all parts can be reached by the wa-
ter jets (see „Loading the dishwash-
er" on page EN-13).
Select the correct dishwashing
programme (see „Dishwasher pro-
gramme table" on page EN-16).
Use the correct dosage of dish-
washer detergent (see „Dishwasher
programme table" on page EN-16).
Ensure that no dishes are impeding
the motion of the spraying arm.
Clean the nozzles (see „Cleaning
the spraying arm" on page EN-22).

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

609123

Table of Contents