Hanseatic WQP8-J7636E User Manual page 62

Page EN-26 Installation, connection and commissioning
Recess dimensions
(c)
3. Affix the condensation protection film
supplied (c) to the underside of the work-
top. In this way, you will avoid damage to
the work surface as a result of hot steam
which may be emitted from the dishwash-
er if the dishwasher door is left open.
90°
820 mm
580 mm
Inlet/outlet area
and electrical con-
nection.
450 mm
90°
80 mm
100 mm
4. Place the dishwasher in the desired posi-
tion.
5. In order to compensate for uneven floor
surfaces and set up the dishwasher on
a level horizontal base, you can screw
the four adjustable feet (31) in or out. The
adjustable feet have slots all around their
circumference. Insert a screwdriver and
use it to turn the adjustable foot. Use a
spirit level to align the dishwasher.
(31)