Table of Contents
Advertisement
4 Configuration
To create a new Port-Based VLAN group, click Add VLAN and the following will be displayed:
Enter the VLAN Name and select the Member port to be created.
Click Apply to make the configurations take effect.
Click Back to discard any changed made and return to the previous window.
L2 Features > VLAN > Management VLAN
The 802.1Q Management VLAN is used to transfer management authority of the switch from the default
VLAN to another VLAN. This allows for more flexible network management. There can only be one
management VLAN at a time when this function is enabled.
The fields that can be configured are described below:
Item
Management VLAN
VID
Click Apply to make the configurations take effect.
L2 Features > VLAN > Asymmetric VLAN
The Asymmetric VLAN allows for a more efficient use of shared resources, such as server or gateway
devices.
Figure 4.37 - L2 Features > VLAN > Port-Based VLAN - Add
Figure 4.38 - L2 Features > VLAN > Management VLAN
Description
Select to enable or disable the Management VLAN function. The
default is Disabled.
Select the VID to act as the managing VLAN.
Table 4.18
NOTE: When 802.1Q Management VLAN is
enabled, the 802.1Q VLAN should be enabled
first.
D-Link Smart Managed Switch User Manual
26
Advertisement
Table of Contents
