Table of Contents
Advertisement
1 Product Introduction
1
Product Introduction
Thank you and congratulations on the purchase of your new D-Link Smart Managed Switch.
D-Link's next generation Smart Managed Switch blends plug-and-play simplicity with exceptional value and
reliability for small and medium-sized business (SMB) networking. The Switch is housed in a robust metal
case with easy-to-view front panel diagnostic LEDs.
Flexible Port Configurations. DGS-1100-08PLV2 is the new generation of Smart Managed Switches,
featuring 8-port 10/100/1000 Mbps.
D-Link Green Technology. DGS-1100-08PLV2 features D-Link Green Technology which helps conserve
power without sacrificing operational performance. Using IEEE 802.3az Energy Efficient Ethernet (EEE),
DGS-1100-08PLV2 saves power by automatically putting inactive ports into a sleep mode.
Extensive Layer 2 Features. Designed as comprehensive L2 devices, the Switch supports a variety of
functions such as FDB, VLAN, Spanning Tree, and Loopback Detection to enhance performance and
network resilience.
Traffic Segmentation and QoS. The Switch supports 802.1Q VLAN standard tagging to enhance network
security and performance. The Switch also supports 802.1p priority queues, enabling users to run
bandwidth-sensitive applications such as streaming multimedia by prioritizing that traffic in network. The
Surveillance VLAN will place the video traffic from pre-defined IP surveillance devices to an assigned VLAN
with higher priority, so it can be separated from normal data traffic.
Network Security. Storm Control can help to keep the network from being overwhelmed by abnormal
traffic. Meanwhile, Port Security provides administrators with an additional layer of security to prevent
unauthorized users from accessing the network.
Versatile Management. DGS-1100-08PLV2 features an intuitive, web-based management interface that
allows administrators to remotely control their network down to the port level. The D-Link Network Assistant
(DNA) easily allows administrators to discover multiple D-Link Smart Managed Switches within the same L2
network segment and display them on-screen for instant access. With this utility, users do not need to
change the IP address of their PC. This allows for simultaneous configuration and basic setup of all
discovered devices, including password changes and firmware upgrades.
DGS-1100-08PLV2
4-Port 10/100/1000Mbps PoE + 4-Port 10/100/1000Mbps Smart Managed Switch.
Front Panel
Power LED: The Power LED lights up when the Switch is connected to a power source.
Reset: Press the Reset button for 6 to10 seconds to reset the Switch back to the default settings and then
reboot. The port LEDs will light up solid amber. Press the Reset button for longer than 11 seconds to enter
the loader mode for bootup. The port LEDs will light up solid green for 2 seconds.
Link/Act/Speed LED (Ports 1-8):
Flashing: Indicates a network link through the corresponding port.
Figure 1.1 - DGS-1100-08PLV2 Front Panel
2
D-Link Smart Managed Switch User Manual
Advertisement
Table of Contents
