Toshiba 2000 User Manual page 43

Important
• If the running application cannot be terminated normally for some reason or other,
Windows is forcibly terminated subject to the completion waiting time set with the
RAS driver.
In this case, the file data of application or Windows may be destroyed.
Fully confirm application operation in advance that it is free of problems.
Important
• If an input power supply is turned off during Windows starting, power supply OFF
may be carried out without carrying out shutdown processing.
Important
• When it mounts two or more sets of C2 in one base unit, after all C2 carries out the
completion of a shutdown, power supply OFF is carried out.
l
If AC power is restored during the shutdown processing, power is automatically turned
back on after the operation described in step (3).
l
The battery's hold time is 4 minutes maximum (when the battery is fully charged and
operates at the rated output level). A recharge of about 2 hours is necessary for the
battery to make up for the loss of its capacity by a single Windows shutdown after AC
input power is back on.
Important
• When battery capacity runs short during battery operation, a power supply is turned
off compulsorily.
In this case, the file data of application or Windows may be destroyed.
Do not repeat OFF of an input power supply.
Important
• PS694 is not a thing supposing use in the inferior input power supply state.
Battery operation is performed, while the input power supply turns off, even if it is
less than the set-up time at the time of retentive power interruption.
When there is extremely much generating frequency of a power interruption, the
charge capacity of a battery runs short and power supply OFF may be carried out
before the completion of a shutdown at the time of input power supply OFF.
6F8C1111
Operation after power recovery
Hold time and charge time of a built-in battery
23