The Mouse Does Not Work - Toshiba 2000 User Manual

Appendix A Q&A
Screen display is improper.
Nothing is displayed.
Screen display is
distorted, size or position
is improper.
No character is entered when a key is pressed.
Unable to enter from the
keyboard.
There is no response
from any key.
There is no response
when power on is
repeated.
The desired character
cannot be entered.

The mouse does not work

The mouse does not
Respond
Operating system does not start.
An error message
appears during startup.
An error message
appears when using an
application program.
46
Q
Symptom
Is the main unit and CRT power
on?
Is the CRT power cable
connected?
Is the CRT signal cable
connected properly?
Are the CRT brightness and
contrast adjusted properly?
Q
Symptom
Is the keyboard cable plug
connected to the mouse
connector?
Are the CapsLock, NumLock,
and ScrollLock lamps lit
properly?
Q
Symptom
Is the mouse connected to the
keyboard connector?
Q
Symptom
Did you turn the power off and
then back on immediately
Is the BIOS set correctly?
A
Check
Turn on the power.
See "3.1.1 Turning On the
Power"
Turn off the power once and
plug into an electrical outlet.
Connect the cable securely.
See "2.5 Power Supply
Connection"
Turn the brightness and
contrast knobs to adjust. Refer
to the CRT operation manual for
details.
A
Check
Connect the keyboard cable
plug to the keyboard connector.
Turn the power off and then
back on after a while.
Press the {Del} key while
pressing the [Ctrl] key and [Alt]
key.
Use the [Caps Lock] key and
[Num Lock] key to obtain the
desired state.
A
Check
Connect the mouse to the
mouse connector.
A
Check
? Wait at least 5 seconds after
turning off the power before
turning it back on.
Check "6.1 Setting the BIOS"
Refer to your application
program's operation manual.
Computer module C2PU37 User's Manual
Action
Action
Action
Action