Name And Function Of Each Part - Toshiba 2000 User Manual

Chapter 1 Before Turning on the Power

1.2 Name and Function of Each Part

10/100BASE-TX connector
Mouse connector
Keyboard connector
RGB connector
FDD connector
RS-232C connector
(COM1)
USB connector
LEDs
switches
DIP switch
PC card slots
2
RGB connector
Ethernet
(10/100base-TX)
LEDs indicating
RST Sw itch
INZ Sw itch
USB connector
DIP-SW
Connector for the Ethernet 10BASE-T/100BASE-TX connector.
Connector for the PS/2 mouse.
Connector for the PS/2 keyboard.
Connector for the analog RGB display
Connector to connect the 3.5-inch (2HD, 2DD) external floppy disk drive.
Connector to connect the RS-232C interface device (such as mouse or
modem).
Connector to connect USB compatible device.
and push button
LEDs indicating the module status and RESET/INZ button.
User settable switches. The setting can be read from user application
program in the C2.
Slot to insert the PC card.
C2PU37
R UN
H DD
４
３
２
HDD
１
RST
INZ
0 1
USB
S W1
Computer module C2PU37 User's Manual
HDD Pack
PC card slots
t
COM por
HDD Drawer
HDD fixed board
Mouse
Keyboard