Toshiba 2000 User Manual page 24

Chapter 1 Before Turning on the Power
Dedicated LED
RUN (green)
HDD (green)
General LEDs 1-4
(Green/Red: 2 colors x 4)
Push button switches
RST
INZ
4
Dedicated LED
General LED
Push button
switch
LEDs to indicate the CPU and HDD operating status.
Indicates the operating status of the watchdog timer (WDT).
• When WDT is active
ON: WDT timeout has not occurred
Blink: WDT timeout has occurred
(Alternating interval is the WDT timeout interval set by the user)
• When WDT is not used
Blink at approximately 1 second interval
General LEDs 1 - 4
Hard disk drive (HDD) access lamp. Turns ON when the internal hard disk
drive is operating.
Switches to perform standalone initialization of the module.
Switches to perform standalone initialization of the module.
Switch to perform hardware reset of the module.
Switch to shut down Windows and restart.
Computer module C2PU37 User's Manual